Published On: Wed, Aug 9th, 2017

Go Around or Not?

Share This



I always enjoy reading about safety items or safety procedures when it comes to flying.  A fellow pilot posted this article on Facebook and I wanted to share it with my blog readers.

You can check out Pilot Workshops by clicking on their logo at the top of the page and you can click on the title, Go Around or Not for direct access to the article and listen to Wally Moran narrate.

I can’t say I have followed this procedure to the letter but I will say when my GPS provides the audible alert to five hundred feet I make the decision. It’s a quick read of the airport environment along with my airspeed before adding the last notch of flaps and landing. Just because I committed to land doesn’t mean I won’t go around if it doesn’t feel right crossing over the numbers. For those times I make a landing beyond flat and porpoise or wheelbarrow, then decide saving the nose gear and prop are a better choice, trying one more loop in the pattern. We all have those crap landing days.




Subscriber Question:
“When should I give up on an approach and go-around? How do I recognize a non-stabilized approach?” – Walter W.

“Ask the guys who have landed long and have gone off the end of the runway.  They will tell you to go around early and often. But, sadly it’s too late for them. Almost all runway over-runs started with an unstabilized approach.

go_around_or_not_UPDATED.pngI think the first sign of an unstabilized approach is that little voice in the back of your head telling you something is not right. We all have made lots of good approaches and it is not too hard to tell when things just don’t look right. But the urge is strong to press on and see if we can’t get it all together by touchdown.

So the real question is – When is it too late to save the approach?

At the airline I worked for, our policy on visual approaches was to have all parameters where they were supposed to be prior to reaching 500 feet above ground level. In our case the parameters were speed stabilized at proper approach speed, sink rate stabilized at less than 1000FPM and final flap configuration. I always planned to have all that done at 1000 feet then if I missed a little, I still had time to fix it before 500 feet. Now if we were making an instrument approach then we needed all those things at the FAF. A go-around was mandatory if we were not on those numbers.

That policy worked good for me for many years so that is what I use for my general aviation flying. I try to recognize 500 feet above the ground on all visual approaches and at that time I double check that the green gear light is on, confirm my speed to be within 10 mph of my target and in a position that given my current sink rate I will land where I planned. If I don’t have the airplane within those parameters, I go around.

I always plan to land just past the numbers except on very long runways where it may be advantageous to land at a different spot. But, I always have a spot planned.  If I am doing an instrument approach I plan to be stabilized with gear down and landing checklist complete prior to the FAF. I am simply too busy flying the approach to be bothered with changing airspeeds, trimming and checklists inside the FAF.

The pilot who has not thought this through ahead of time will someday find himself floating down the runway wondering if it’s too late to go around or if he will get stopped by the end of the runway. This is a poor time and place to try to make that decision. On the other hand, having already made the decision on approach standards before you takeoff, you only have to execute the missed approach if you don’t meet the standards.” 


About the Author


Leave a comment

XHTML: You can use these html tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>